CM 01 W1 1250

White-fired ceramic body (shlicker), suitable for large-scale products (pots, pots, sanitary ceramics, etc.). The high content of chamotte (over 30%) allows casting of thick-walled products. Frost-resistant. Additives are added to the product, which reduces dial-up time and increases the hardness of the raw.

  • Biscuit temperature 980-1040 ° C.
  • Temperature of glaze firing from 1080 to 1250 ° C.
  • Specific gravity 1740-1850 g / l.
  • Viscosity - 21-23sec

Recommended glazes: GTR 01, GO 01, GTR 07 (over 1100 ° C), GO 05 (over 1100 ° C), GTR 10, GO 10.

CM 02 W1 1220

Porcelain casting body, which meets all the strictest requirements for whiteness and visibility. Contains special additives that reduce retention time and increase the hardness of the raw. It is suitable for all kinds of household items, molded by the method: dining services, promotional items, souvenirs and more.

  • Biscuit temperature 980-1040 ° C.
  • Glaze temperature from 1180 to 1220 ° C.
  • Specific gravity -  1700-1720 g / l.
  • Viscosity - 21-23sec

Recommended glazes: GTR 01, GO 01, GTR 07 (over 1100 ° C), GO 05 (over 1100 ° C).

CM 05 W2 1180

White-fired ceramic body, extremely versatile, suitable for small souvenirs and promotional items fired at temperatures around 1060 ° C and larger pieces of pots, pots and sanitary ceramics. Contains special additives that reduce retention time and increase the hardness of the raw.

  • Biscuit temperature 980-1040 ° C.
  • Temperature of glaze firing from 1070 to 1180 ° C.
  • Specific gravity 1690-1710 -
  • Viscosity - 18-23sec

Recommended glazes: GTR 01 (over 1100 ° C), GO 01 (over 1100 ° C), GTR 07, GO 05, GTR 10 (over 1170), G0 10

(над 1170).

CM 06 W8 1150

Red ceramic shlicker for household ceramics.

Gives excellent results for small items as well as for even sizes up to 100cm.

  • Biscuit temperature 800-980 ° C.
  • Temperature of glaze firing from 1040 to 1150 ° C.
  • Specific gravity 1690-1710 g / l.
  • Viscosity - 20-25sec

Recommended glazes: GTR 07, GO 05.

CASTING CERAMIC BODIES - SLIPS

Certificates

All products are accompanied by the necessary documentation certifying their quality, characteristics and purpose.ние.

Control

Continuous quality control and chemical analysis from raw material to final product.

 

Eco

The raw materials and additives used in the production are entirely natural products.